Products

Short Description:■ Vertical travel of holder: 1 00mm■ Fine adjustment range: 2mm 

Short Description:■ Vertical travel of holder: 335mm■ Fine adjustment range: 2mm 

Short Description:■ Vertical travel of holder: 1 50mm■ Fine adjustment range: 2mm 

Short Description:■ Vertical travel of holder: 300mm■ Fine adjustment range: 2mm 

Short Description:■ Shockproof,IP67 dust/waterproof■ Mainly used for milling machines and CNCmachine tools1. determine coordinate point on workpiec...

Short Description:■ Center cylinders or holes on machine tools■ Can be used with dial test indicators 

Short Description:■ Center cylinders or holes on machine tools■ Can be used with dial test indicators or dial indicators 

Short Description:■ Non-magnetic■ TIN coating, hardness HV2300, extremely wear resistance■ Suitable for machine speed 500~2000rpm 

Short Description:■ Non-magnetic■ TIN coating, hardness HV2300, extremely wear resistance■ Suitable for machine speed 400~600rpm 

Short Description:■ Non-magnetic■ TIN coating, hardness HV2300, extremely wear resistance■ Suitable for machine speed 400~600rpm■ Find edge or hole...

Short Description:■ Ceramic contact point, non magnetic■ Hardened shank■ Suitable for machine speed: 400-600rpm 

Short Description:■ Non-magnetic■ CrN coating, hardness HV2000, extremely wear resistance■ Suitable for machine speed 400~600rpm 

Short Description:■ The LED will be light with alarm when the ballcontacts the workpiece■ Not suitable for rotating use■ Hardened shank and contact...

Short Description:■ Non-magnetic■ TIN coating, hardness HV2300, extremely wear resistance■ Suitable for machine speed 400~600rpm 

Short Description:■ Hardened shank and contact point■ Suitable for machine speed 400~600rpm 

Short Description:■ Non-magnetic■ TIALN coating, hardness HV3500; TIN coating, hardness Hv2300, extremely wear resistance■ Suitable for machine spe...

Short Description:■ Hardened shank and contact point■ Suitable for machine speed 400~600rpm 

Short Description:■ Non-magnetic■ TIALN coating, hardness HV3500; TIN coating, hardness HV2300, extremely wear resistance■ Suitable for machine spe...

Short Description:■ Magnetic base 

Short Description:■ Magnetic base with on/off switch 

Short Description:■ IP65 protection level■ Magnetic base■ With backlight, will turn on automatically when close to zero (±0.002mm)■ Turn off automa...

Short Description:■ No need to set zero before use■ Sensibility: 0.1mm/m(=0.0057°) 

Short Description:■ For using setting machined surfaces precisely horizontal and vertical■ Sensibility: 0.02mm/m per division■ V-groove on the bott...

Short Description:■ Sensibility: 0.01mm/m(0.001°)■ Accuracy:10mm range≤±0.01mm/m10mm-50mm range≤±0.02mm/m■ For use in setting machined surfacesprec...