Metrology and Systems

Short Description:■ Grade 6H■ Meet ISO1502■ Hardness HRC60-62 

Short Description:■ Grade 6g■ Meet ISO1502■ Hardness HRC60-62 

Short Description:■ Grade H7■ Hardness HRC 85-89■ Supplied range from 1mm to 30mm 

Short Description:■ Grade H7■ Hardness HRC 60±2■ Confirms to standard GB/T 1957-2006■ Supplied range from 1mm to 100mm 

Short Description:■ For inside micrometer and bore gage setting■ The size marked on the setting ring is checked at the direction of the marking lin...

Short Description:■ Made of alloy steel■ One unit includes 3pcs same size■ Hardness HRC60-62■ Accuracy:±0.25μm (grade 0), ±0.5μm (grade 1)■ Roundne...

Short Description:■ Hardness: HRC60-62■ Conforms to standard ASME B89.1.5 

Short Description:■ To measure diameter and angle of taper holes■ Each size has a pair of steel ball■ Material: tool steel■ Hardness: HRC63■ Diamet...

Short Description:■ For containing pin gauges 

Short Description:■ Made of alloy steel■ Hardness HRC62-65■ Accuracy:±1μm (range:0.1-13mm); ±2μm (range:13-40mm) 

Short Description:■ Supplied with wrench for installing pin gauges■ Clamping bushes are made of brass 

Short Description:■ Supplied diameter from 0.3 to 30mm,■ Accuracy:±1μm (range:0.3-13mm); ±2μm (range:13-30mm)■ Carbide material■ Hardness HRA90-90....

Short Description:■ Accuracy:±1μm (range:0.1-13mm); ±2μm (range:13-40mm)■ Made of alloy steel■ Hardness HRC62-65 

Short Description:■ For angle comparison■ One angle can be as used in triangle blocks four angles can be as used in rectangle blocks■ With manufact...

Short Description:■ For checking the accuracy of measuring tools like calipers, height gage and so on■ Can be used in vertical and horizontal orien...

Short Description:■ For gauge blocks over 100mm with clamping holes■ Optional accessory: gauge block holder accessory, gauge block accessory 

Short Description:

Short Description:■ To expand gage block applications 

Short Description:■ Meet ISO3650■ Grade 0■ With manufacturer inspection certificate 

Short Description:■ For checking micrometers accuracy■ Grade 0■ Meet ISO 3650■ With manufacturer inspection certificate 

Short Description:■ For checking micrometers accuracy■ With optical parallel■ Grade 0■ Meet ISO 3650■ With manufacturer inspection certificate 

Short Description:■ For checking calipers accuracy■ Meet ISO 3650■ Gauge blocks are made of alloy steel■ With manufacturer inspection certificate 

Short Description:■ For checking calipers accuracy■ With ring gauges■ Meet ISO 3650■ Gauge blocks are made of alloy steel■ With manufacturer inspec...

Short Description:■ Made of steel■ Meet ISO 3650■ ■ With manufacturer inspection certificate