Micrometers

Short Description:

Short Description:■ Graduation: 0.001mm■ Carbide measuring faces■ Ratchet stop■ Setting rings are included 

Short Description:■ Resolution: 0.001mm/0.00005″■ IP65 protection level■ Button: on/off, set, mm/inch,ABS/INC, data output■ Automatic power off■ Da...

Short Description:■ 6-12mm graduation: 0.001mm. Steel measuring faces12-300mm graduation: 0.005mm. Carbide measuring faces■ Ratchet stop■ Extension...

Short Description:■ Resolution: 0.001mm/0.00005″■ IP65 protection level■ Button: on/off, set, mm/inch, ABS/INC, data output■ Automatic power off■ D...

Short Description:■ For micrometers which measuring range is less than 100mm 

Short Description:■ For micrometers which measuring range is less than 100mm 

Short Description:■ Check the flatness of measuring faces 

Short Description:■ Check the flatness and parallelism of measuring faces of micrometer■ Flatness of A and B :0.03μm■ Parallelism between A and B :...

Short Description:■ Check the flatness and parallelism of measuring faces of micrometer■ Flatness of A and B ≤0.1μm■ Parallelism between A and B ≤ ...

Short Description:■ For outside micrometers 0-25mm, 25-50mm, 50-75mm and 75-100mm 

Short Description:■ For screw thread micrometer (series 333 or 343)  

Short Description:■ For standard value setting 

Short Description:■ Graduation 0.01mm 

Short Description:■ Graduation: 0.01mm■ Carbide measuring faces■ Ratchet stop 

Short Description:■ Resolution 0.001mm/0.00005″■ IP65 protection level■ Button: on/off, set, mm/inch, ABS/INC, data output■ Automatic power off■ Da...

Short Description:■ Resolution 0.001mm/0.00005″■ IP65 protection level■ Button: on/off, set, mm/inch, ABS/INC, data output■ Automatic power off■ Da...

Short Description:■ Measure diameter of wires and small balls■ Graduation 0.01mm■ Ratchet stop■ Carbide measuring faces 

Short Description:■ Micrometer head graduation: 0.002mm■ Dial indicator: graduation 0.001mm, accuracy 0.001mm■ Carbide measuring faces■ Supplied wi...

Short Description:■ Measure the width, height and depth of can seams■ Graduation 0.01mm 

Short Description:■ Measure thickness of sheet metal, paper, plastic and rubber parts■ Graduation 0.01mm■ Ratchet stop■ Carbide measuring faces 

Short Description:■ Graduation 0.01mm■ Measure width of grooves inside bores■ Non-rotating spindle■ Two graduations for inside and outside measurem...

Short Description:■ Supplied in pair 

Short Description:■ Measure over-pin diameter of gears■ Graduation 0.01mm■ Ratchet stop■ Supplied with setting standards (except 345-001-01)■ Optio...