Calipers

Short Description:■ Resolution:0.005mm/0.0002″■ Reading in digit and analog■ Display can be rotated by 170°■ Button function: tolerance Go and No-G...

Short Description:■ Resolution:0.005mm/0.0002″■ Reading in digit and analog■ Display can be rotated by 170°■ Button function: tolerance Go and No-G...

Short Description:

Short Description:

Short Description:■ Measure depth of small groove and hole■ Resolution: 0.01mm/0.0005″■ Buttons: on/off, zero, mm/in, INC■ Automatic power off■ Dat...

Short Description: ■ IP67 protection level ■ Absolute measuring system ■ Resolution: 0.01mm/0.0005″ ■ Automatic power off ■ Buttons: zero, mm/inch,...

Short Description:■ Graduation 0.01mm■ Non-rotating spindle■ Ratchet stop■ Carbide measuring faces■ Supplied with setting standards (except 378-001...

Short Description:■ Used for grinding the depth measuringsurface of the end of calipers 

Short Description:■ Measure the external dimension 

Short Description:■ For lapping measuring surfaces of caliper lower jaws and outside micrometer■ Suitable for 0-300mm range calipers and 0-100mm ra...

Short Description:■ Resolution: 0.01mm/0.0005″■ Automatic power on/off■ Buttons: on/off, zero, mm/in, INC■ Data output(cable code:100-03 or 100-04)...

Short Description:■ IP67 protection level■ Absolute measuring system■ Resolution: 0.01mm/0.0005″■ Automatic power off■ Buttons: zero, mm/inch, data...

Short Description:■ To check calipers and height gages■ Constructed with steel gage blocks■ With manufacturer inspection certificate 

Short Description:■ Measure the external dimension  

Short Description:

Short Description:■ Made of stainless steel■ Satin chrome plated reading surface■ Carbide scriber tip■ With accessory: carbide scriber tip