Metrology and Systems

Short Description:

Short Description:■ For angle set-up in tooling, production and inspection■ Hardness HRC55 

Short Description:■ For angle set-up in tooling, production and inspection■ Hardness HRC55 

Short Description:■ Parallelism between top and bottom: 5μm■ Height difference of a matched pair: 5μm■ Hardened to HRC55-60■ Made of alloy tool steel 

Short Description:■ For positioning cylindrical workpieces■ Two V-blocks per set■ Each V-block has four 90° V-grooves■ Hardness HB 170-241 

Short Description:■ Hold cylindrical workpieces for inspection and machining■ Hardened to HRC60±2 

Short Description:■ Hold cylindrical workpieces for inspection and machining■ Two V-blocks per set■ Side lie-down use is possible■ Hardened to HRC6...

Short Description:■ Hold cylindrical or rectangular workpieces for inspection and machining■ Two V-blocks per set■ Hardened to HRC60±2■ Applicable ...

Short Description:■ Hold cylindrical workpieces for inspection and machining■ Two V-blocks per set■ V groove on the top for large shafts 

Short Description:■ Hold cylindrical workpieces for inspection and machining■ Two V-blocks per set■ V groove on the top for large shafts■ V groove ...

Short Description:■ Two V blocks per set■ Made of hardened tool steel 

Short Description:■ Supplied a pair, for holding long cylindrical workpiece 

Short Description:■ Hold cylindrical workpieces for inspection, not suitable for machining due to weak magnetic force■ Two V-blocks per set 

Short Description:■ Hold cylindrical workpiece for inspection and machining■ Top groove for large shafts■ Bottom grooves for small shafts 

Short Description:■ Hold cylindrical workpiece for inspection and machining 

Short Description:■ 5 jacks per set■ Adjustable height■ For large granite surface plates: 2000x1000mm, 2000x1500mm, 2500x1500mm, 3000x2000mm 

Short Description:■ For medium size granite surface plates■ Adjusting range of jacks: 10mm■ One foot on the bottom is adjustable■ The height can be...

Short Description:■ Made of fine-grained granite■ With calibration certificate■ Customized size can be ordered 

Short Description:■ Resolution: 0.01mm/0.0005″■ Data output■ Button: on/off, zero, mm/inch, ABS, SET, HOLD, TOL■ Made of stainless steel■ Supplied ...

Short Description:Type A■ Resolution: 0.01mm/0.0005″■ Buttons: on/off, zero, mm/inch■ Automatic power off■ Data output(cable code:100-03 or 100-04)...

Short Description:■ Nickel plated 

Short Description:■ Find the center of round plates and shafts■ Made of stainless steel■ Stain chrome plated 

Short Description:■ Made of stainless steel■ Stain chrome finish 

Short Description:■ Grooved bottom for cylinder■ Two pins to be set against the edge of surface plate