Optimum (3338110) Milling Machine OPTImill MH 15V

Description

• Two-stage gear shift
• The drill head can be tilted by 45°, enabling milling and drilling work at any angle
• Double-layer height-adjustable spindle guard
• Simple and clear control panel
• With 24V low voltage
• Feed spindles can be adjusted backlash-free thanks to adjustable spindle nuts
• Robust cross table with T-slots and coolant channels
• With micro feed

Technical data

Dimensions and weights

• Length (product) approx.: 504 mm
• Width/depth (product) approx.: 515 mm
• Height (product) approx.: 800 mm
• Net weight approx.: 58.5 kg

Drilling/milling head

• Drill-mill head tilt range: ±45 °
• Mill head swivel range: ± 90 °

Drilling/milling output

• Max. size milling head: 50 mm
• Max. size shaft milling cutter: 13 mm
• Drilling performance steel (S235JR): 13 mm
• Continuous drilling performance steel (S235JR): 11 mm

Electrical Data

• Drive motor output: 0.5 kW
• Supply voltage: 230 V
• Mains frequency: 50 Hz

Milling table horizontal

• Horizontal milling table length: 400 mm
• Horizontal milling table width: 120 mm
• Horizontal milling table T-groove size: 10 mm
• Horizontal milling table T-groove number: 3
• Horizontal milling table T-groove spacing: 35 mm

Cross table

• Clearance vertical spindle - cross table: 250 mm

Travel

• Travelxaxis manual: 240 mm
• Travel Y axis manual: 135 mm
• Travel Z axis manual: 150 mm

Vertical spindle

• Vertical spindle reach: 145 mm
• Vertical spindle spindle chuck: MT 2
• Vertical spindle speed range: 90 - 2250 min¯¹
• Vertical spindle number of gears: 2 Steps
• Vertical spindle speed control: electronically adjustable
• Vertical spindle quill diameter: 60 mm
• Vertical spindle tightening bar: M10
• Vertical spindle quill stroke: 50 mm

Delivery content

• Drill chuck 1-13 mm
• taper shank
• T-nut
• Operating tool

Transport info

• EAN: 4030635043017
• Customs number: 84593900
• Length: 510 mm
• Height: 630 mm
• Width: 490 mm
• Gross weight: 65 kg
• Net weight: 58.5 kg

Optional accessories

• Digital position indicator DRO 5
• Magnetic tape MB-MW
• Workplace mat 1840x640 mm
• Workplace mat 1840x940 mm
• Workplace mat 3040x640 mm
• Workplace mat 3040x940 mm
• Chip tray 720x470x30 mm
• Clamping tool kit SPW 8
• Collet chuck set MK 2 / ER 25 - M10
• Collet chuck set MK 2 / ER 32 - M10
• Collet set ER 25, Ø 1 - 16 mm
• Collet set MK 2 direct clamping / M 10
• Cooling lubricant nebulizer MMC1
• Cutting oil spray 400 ml
• End mill set HSS, 12-piece
• End mill set HSS, 20-piece
• Keyless drill chuck DKC13 0-13 mm
• Leveling plate SE 1
• T-nut M 8/10 mm
• Universal base MSM 1 340x420x800 mm
• Universal coolant device 230 V