Optimum (3338116) Drilling-milling Machine OPTImill BF 16Vario

Description

• Versatile application possibilities
• Two-stage gear ratio
• Tool holder MK 2
• Safety electronics in 24 Volt version
• EMC filter class C1
• Drilling and milling head can be tilted by ± 90 ° on both sides, thus drilling and milling in angular position as required
• Height-adjustable and large-dimensioned protective screen with microswitch
• Accurate delivery through positionable scale rings on all handwheels
• Simple and clear operating unit with on-off switch, potentiometer and emergency stop impact switch
• Infinitely variable speed from 100 to 3,000 min-1
• High concentricity measured by tapered roller bearing better than 0.015 mm in quill
• Stable column with dovetail guide via wedge bars adjustable on all 3 axes
• Game in the feed spindle adjustable and adjustable
• Column laterally displaceable for extended application
• Massive cross table with T-slots and coolant channel as well as adjustable end stops
• Integrated longitudinal scale in the cross table
• All travel paths can be read on scales
• Clean milling pattern by individually clamped guides
• Inexpensive and stable in value

Technical data

Dimensions and weights

• Length (product) approx.: 505 mm
• Width/depth (product) approx.: 465 mm
• Height (product) approx.: 795 mm
• Net weight approx.: 62 kg

Drilling/milling output

• Max. size milling head: 52 mm
• Max. size shaft milling cutter: 20 mm
• Drilling performance steel (S235JR): 16 mm
• Continuous drilling performance steel (S235JR): 12 mm

Electrical Data

• Supply voltage: 230 V
• Mains frequency: 50 Hz

Milling table horizontal

• Horizontal milling table length: 400 mm
• Horizontal milling table width: 120 mm
• Min. clearance vertical spindle - horizontal milling table: 0 mm
• Max. clearance vertical spindle - horizontal milling table: 275 mm
• Horizontal milling table T-groove size: 10 mm
• Horizontal milling table T-groove number: 3
• Horizontal milling table T-groove spacing: 35 mm

Standards and certifications

• Standard: DIN EN 55011
• EMC level: C1

Travel

• Travelxaxis manual: 220 mm
• Travel Y axis manual: 160 mm
• Travel Z axis manual: 210 mm

Vertical spindle

• Vertical spindle reach: 170 mm
• Vertical spindle spindle chuck: MT 2 / M10
• Vertical spindle speed range: 100 - 3000 min¯¹
• Vertical spindle swivel range milling cutter head Z -xplane: ± 90 °
• Vertical spindle number of gears: 2
• Vertical spindle speed control: electronically adjustable
• Vertical spindle tightening bar: M 10
• Vertical spindle quill stroke: 50 mm
• Vertical spindle drive motor output normal operation: 0,5 kW

Delivery content

• Conical mandrel MK 2 / B16
• Pulling rod M 10
• operating tool

Transport info

• EAN: 4030635007057
• Customs number: 84593900
• Length: 483 mm
• Height: 857 mm
• Width: 444 mm
• Gross weight: 78 kg
• Net weight: 62 kg

Optional accessories

• Digital position indicator DRO 5
• Magnetic tape MB-MW
• Workplace mat 1840x640 mm
• Workplace mat 1840x940 mm
• Workplace mat 3040x640 mm
• Workplace mat 3040x940 mm
• Chip tray 720x470x30 mm
• Clamping tool kit SPW 8
• Collet chuck set MK 2 / ER 25 - M10
• Collet chuck set MK 2 / ER 32 - M10
• Collet set ER 25, Ø 1 - 16 mm
• Collet set ER 32, Ø 3 - 20 mm
• Collet set MK 2 direct clamping / M 10
• Coolant hoses with magnetic base KMS 2
• Cooling lubricant nebulizer MMC1
• Copy and face milling cutter Shank MK 2 / M10
• Cutting oil spray 400 ml
• Edge finder Diameter 10 mm
• End mill set HSS, 12-piece
• End mill set HSS, 20-piece
• Holder for cutterhead MT 2
• Keyless drill chuck DKC13 0-13 mm
• Keyless drill chuck DKC16 0-16 mm
• Leveling plate SE 1
• Mandrel for drill chuck Cone outside MK 2 / M10 / B16
• Milling machine vise VMQ 100
• Milling machine vise VMQ 80
• Milling set carbide, 18-piece
• Parallel spacer kit 20 parts
• Precision machine vice FMS 100
• Precision machine vice FMSN 100
• Precision quick-action drill chuck 1-10 mm, B16
• Prism WP 30
• T-nut M 8/10 mm
• Tapping attachment M5 - M12 / B16
• Three axis vise MV3-75
• Twist Drill Set 25 pieces, 1 - 13 mm
• Twist Drill Set 41-piece, 6 - 10 mm (0.1 mm rising)
• Two axis vise ZAS 50
• Universal base MSM 1 340x420x800 mm
• Vibration damper machine foot SE 55
• Workpiece support WPS-1
• Workpiece support WPS-2