Optimum (3338132) Drilling-milling Machine OPTImill MH 20VL

Description

• Precisely processed
• High concentricity due to tapered roller bearings ? 0.015 mm measured in the sleeve
• Motor with two-stage gear ratio for powerful transmission of motor power
• Powerful DC motor with permanent current monitoring
• Air filter for motor
• New electrical system with improved motor protection (extended circuit board and circuit board for EMC)
• Safety electrics in 24 volt version
• Control electronics with integrated relay control
• Massive and generously dimensioned cross table, precisely surface-machined with T-slots and adjustable gibs
• Adjustable end stops
• Stable dovetail guide with adjustable gibs
• Adjustable and readjustable feed spindle play
• Emergency stop switch
• Drilling/milling head can be tilted by ±60
• Right/left rotation
• Machine lamp
• Double-row angular contact ball bearings in the axes, adjustable without play
• Height-adjustable protective screen with microswitch, against flying chips and parts, for maximum protection of the user
• Preparation for mounting the DRO5 digital position indicator in thexand Y axes (prepared groove for retrofitting the magnetic strips)
• Lockable main switch

Technical data

Dimensions and weights

• Length (product) approx.: 770 mm
• Width/depth (product) approx.: 714 mm
• Height (product) approx.: 917 mm
• Net weight approx.: 99 kg

Drilling/milling head

• Mill head swivel range: ± 60 °

Drilling/milling output

• Max. size milling head: 52 mm
• Max. size shaft milling cutter: 20 mm
• Drilling performance steel (S235JR): 16 mm
• Continuous drilling performance steel (S235JR): 12 mm

Electrical Data

• Supply voltage: 230 V
• Mains frequency: 50 Hz

Milling table horizontal

• Horizontal milling table length: 700 mm
• Horizontal milling table width: 180 mm
• Horizontal milling table T-groove size: 12 mm
• Horizontal milling table T-groove number: 3
• Horizontal milling table T-groove spacing: 63 mm
• Horizontal milling table max. load bearing capacity: 50 kg

Cross table

• Clearance vertical spindle - cross table: 255 mm

Standards and certifications

• Standard: DIN EN 55011
• EMC level: C1

Travel

• Travelxaxis manual: 480 mm
• Travel Y axis manual: 175 mm
• Travel Z axis manual: 210 mm

Vertical spindle

• Vertical spindle reach: 170 mm
• Vertical spindle spindle chuck: MK 2
• Vertical spindle speed range: 100 - 3000 min¯¹
• Vertical spindle number of gears: 2
• Vertical spindle speed control: electronically adjustable
• Vertical spindle quill diameter: 60 mm
• Vertical spindle quill stroke: 50 mm
• Verticle spindle drive motor output S6-30 % operation: 0,75 kW

Delivery content

• Tapered mandrel MK2/B16
• Tightening rod M 10
• Operating tool

Transport info

• EAN: 4030635043154
• Customs number: 84593900
• Length: 770 mm
• Height: 917 mm
• Width: 714 mm
• Gross weight: 117 kg
• Net weight: 90 kg

Optional accessories

• Workplace mat 1840x640 mm
• Workplace mat 1840x940 mm
• Workplace mat 3040x640 mm
• Workplace mat 3040x940 mm
• Chip tray 720x470x30 mm
• Collet chuck set MK 2 / ER 25 - M10
• Collet chuck set MK 2 / ER 32 - M10
• Collet set ER 25, Ø 1 - 16 mm
• Collet set ER 32, Ø 3 - 20 mm
• Collet set MK 2 direct clamping / M 10
• Coolant hoses with magnetic base KMS 2
• Cooling lubricant nebulizer MMC1
• Copy and face milling cutter Shank MK 2 / M10
• Cutting oil spray 400 ml
• Edge finder Diameter 10 mm
• End mill set HSS, 12-piece
• End mill set HSS, 20-piece
• Holder for cutterhead MT 2
• Keyless drill chuck DKC13 0-13 mm
• Keyless drill chuck DKC16 0-16 mm
• Leveling plate SE 1
• Mandrel for drill chuck Cone outside MK 2 / M10 / B16
• Milling machine vise VMQ 100
• Milling machine vise VMQ 80
• Milling set carbide, 18-piece
• Mounting kit for DRO5 on MH20V/MH22V
• Parallel spacer kit 20 parts
• Precision machine vice FMS 100
• Precision machine vice FMSN 100
• Precision quick-action drill chuck 1-10 mm, B16
• Prism WP 30
• T-nut M 10/12 mm
• Tapping attachment M5 - M12 / B16
• Three axis vise MV3-75
• Twist Drill Set 25 pieces, 1 - 13 mm
• Twist Drill Set 41-piece, 6 - 10 mm (0.1 mm rising)
• Two axis vise ZAS 50
• Universal base MSM 1 340x420x800 mm
• Vibration damper machine foot SE 55
• Workpiece support WPS-1
• Workpiece support WPS-2