Optimum (3403046) Guide and traction spindle Lathes OPTIturn TM 4010D

Description

• Hardened and ground Z-axis guideway
• Guaranteed concentricity of the spindle nose ? 0.015 mm
• Spindle holder Camlock DIN ISO 702-2 No. 5
• Motor protection switch
• Main motor electrically braked
• Clockwise/anticlockwise rotation switchable on the bed slide
• Two-channel safety electronics
• Switch with life cycle calculation tested in accordance with EN ISO 13849
• Perfectly concentric main spindle guarantees high load capacity due to mounted precision tapered roller bearings
• With safety device to prevent simultaneous operation of tapping and feed mechanism
• Safety handwheels with disengagement function in thexand Z axes
• All gear wheels of the feed gear made of steel, hardened and ground, shafts on needle bearings All components are lubricated in an oil bath
• Simple feed operation
• One change gear position
• Switch cabinet with Optimum control system
• Coolant pump with coolant tank and level indicator. Container can be removed for easy cleaning
• LED machine lamp in the machine housing
• Machine base in sturdy steel construction
• Emergency stop switch on the right and left
• Lockable main switch
• Three-jaw lathe chuck included in the scope of delivery
• SWH included in scope of delivery

Technical data

Dimensions and weights

• Length (product) approx.: 1935 mm
• Width/depth (product) approx.: 780 mm
• Height (product) approx.: 1740 mm
• Net weight approx.: 767 kg

Work areas

• Explanation Swing diameter above planing slide: Please note that when installing third-party lathe chucks or faceplates to achieve the specified technically possible turning diameter, operator modifications are required.
• Max. height: 200 mm
• Max. width: 1000 mm
• Swing diameter above machine bed: 400 mm
• Swing diameter above planing slide: 250 mm
• Bed width: 203 mm

Equipment

• Digital position indicator: DPA 31 Plus

Speed range

• Number of gears: 8
• Speed range: 70 - 2000 min¯¹

Electrical Data

• Drive motor output: 2,2 kW
• Supply voltage: 400 V
• Mains frequency: 50 Hz
• Total rated value: 3,0 kW

Cooling lubricant system

• Cooling lubricant system coolant pump output: 100 W

Spindle

• Spindle chuck: Camlock DIN ISO 702-2 No.5
• Tool holder: SWH 3-E
• Spindle bore: 52 mm

Tailstock

• Tailstock chuck: MT 4
• Tailstock quill stroke: 110 mm
• Tailstock quill diameter: 50 mm

Pitches

• Metric pitch: 0,4 - 7 mm/rev
• Number of metric pitches: 32
• Imperial pitch: 56 - 4 Gg/1"
• Number of imperial pitches: 31

Travel

• Travel upper slide: 98 mm
• Travel cross slide: 185 mm
• Travel carriage saddle: 850 mm

Feed

• Longitudinal feed range: 0,014 - 0,38 mm/rev
• Flat feed range: 0,052 - 1,392 mm/rev

Tool clamping

• Tool holder chuck size: 30 mm

Delivery content

• Three-jaw lathe chuck Ø 200 mm, no. 5
• Quick change tool holder 3-E
• Fixed steady 7 - 102 mm
• Travelling steady 10 - 60 mm
• Reduction sleeve MT 6 - MT 4
• Fixed centre MT 4
• Machine initially filled with premium grade oil
• Operating tool

Transport info

• EAN: 4030635050541
• Customs number: 84581900
• Length: 1690 mm
• Height: 860 mm
• Width: 1900 mm
• Gross weight: 860 kg
• Net weight: 756 kg

Optional accessories

• Workplace mat 1840x640 mm
• Workplace mat 1840x940 mm
• Workplace mat 3040x640 mm
• Workplace mat 3040x940 mm
• BISON four-jaw lathe chuck Cast Camlock centric exciting Ø 200 mm Camlock DIN ISO 702-2 No. 5
• BISON three-jaw lathe chuck Camlock casting centre clamping Ø 200 mm Camlock DIN ISO 702-2 No. 5
• Center drill set 10tlg. 0.75-4.5 mm HSS
• Clamping block set for lathes 16-05
• Collet chuck 5C - No. 5
• Collet set SPC 5C
• Cutting oil spray 400 ml
• Face plate Ø 320 mm Camlock DIN ISO 702-2 No. 5
• Internal turning set 12 mm
• Internal turning set 5-piece
• Leveling plate SE 1
• OPTIMUM four-jaw lathe chuck Cast Camlock, centre clamping Ø 200 mm Camlock DIN ISO 702-2 No. 5
• OPTIMUM four-jaw lathe chuck Cast Camlock, single clamping Ø 200 mm Camlock DIN ISO 702-2 No. 5
• Position stop Micro
• Precision machine foot SEU1
• Revolving centering point MT 3
• Revolving centering point MT 3
• Revolving centering point MT 4
• Spare steel holder 20x100 type D
• Spare steel holder 30x100 type H
• Turning tool set 16 mm, 11 parts
• Turning tool set HM 16 mm, 5-part
• Turning tool set HM 16 mm, 5-part
• Turning tool set HM 16 mm, 5-part "Made in Germany"
• Twist drill HSS with Morse taper MT 3