Optimum (3427205) Center Lathe OPTIturn TU 3008V

Description

• Precise processing
• Heavily ribbed prism bed made of gray cast iron, inductively hardened and precision ground
• Hardened and ground Z-axis guideway
• Smooth-running feed gear with rounded gears running in an oil bath
• Guaranteed concentricity of the spindle nose better than 0.009 mm
• Concentricity on the lathe chuck better than 0.04 mm
• Quadruple tool holder
• All guides can be adjusted by wedge strips
• Right / left rotation in the control panel switchable
• Hardened main spindle mounted in adjustable, precision tapered roller bearings
• Tapered roller bearings in P5 quality
• Hardened spindle nose
• Large spindle bore Ø 38 mm
• Lead screw for thread cutting or automatic longitudinal turning
• Guide and feed shaft stored in two sintered bearings
• Automatic longitudinal / flat feeds
• Lead screw and tension spindle cover
• Tailstock for taper turning ± 5 mm adjustable
• Tailstock quill and handwheel with adjustable fine scale 0.02 mm
• Fast, easy and tool-free adjustment by means of a clamping lever
• Handwheels on the carriage with adjustable fine scale 0.04 / 0.01 mm
• Change wheel set in the standard scope of supply for thread cutting
• Emergency stop impact switch

Technical data

Dimensions and weights

• Length (product) approx.: 1525 mm
• Width/depth (product) approx.: 705 mm
• Height (product) approx.: 575 mm
• Net weight approx.: 243 kg

Work areas

• Max. height: 158 mm
• Max. width: 800 mm
• Swing diameter above machine bed: 310 mm
• Swing diameter above planing slide: 190 mm
• Bed width: 180 mm

Speed range

• Speed control: electronically adjustable
• Number of gears: 5
• Speed range: 30 - 3000 min¯¹

Electrical Data

• Drive motor output: 1,1 kW
• Supply voltage: 230 V
• Mains frequency: 50 Hz

Standards and certifications

• Standard: DIN EN 55011
• EMC level: C3

Spindle

• Spindle chuck: Camlock DIN ISO 702-2 No. 4
• Spindle bore: 38 mm
• Tool holder max. chuck height: 18 mm
• Spindle cone: MK 5

Tailstock

• Tailstock chuck: MK 3
• Tailstock quill stroke: 70 mm

Pitches

• Metric pitch: 0,2 - 3,5 mm/rev
• Number of metric pitches: 18
• Imperial pitch: 56 - 8 Gg/1"
• Number of imperial pitches: 21

Travel

• Travelxaxis: 65 mm
• Travel Z axis: 150 mm

Feed

• Longitudinal feed range: 0,085 - 0,832 mm/rev
• Number of longitudinal feeds: 9
• Flat feed range: 0,01 - 0,1 mm/rev
• Number of flat feeds: 9

Delivery content

• Three-jaw lathe chuck Ø 160 mm, centrically exciting
• Fixed centering point MK 3 and MK 5
• bulkhead
• chip pan
• Quadruple steel holder 25 mm
• Change gear set
• operating tool

Transport info

• EAN: 4030635023019
• Customs number: 84581900
• Length: 1500 mm
• Height: 710 mm
• Width: 710 mm
• Gross weight: 295 kg
• Net weight: 252 kg

Optional accessories

• Cutting oil spray 400 ml
• Twist drill HSS with Morse taper MT 3