Optimum (3432247) Precision Center and Turning Center Lathe OPTIturn TZ 4V

Description

• Hardened and ground Z-axis guideway
• Motor protection switch
• Control cabinet with 24 V DC power supply
• Partial enclosure with included, large dimensioned chip guard
• Chip guard with integrated position indicator, coolant hose and additional control panel
• Two-channel safety electronics
• Safety handwheels with disengaging function in the X- and Z-axis
• Face and top slide spindle is hardened and ground and adjustable via split spindle nut
• Lead and traction spindle cover
• Finely graduated feed and tapping range
• Energy chain for gentle guiding of cables and hoses
• Standard gears for metric thread pitches and modular threads are mounted in the machine. Change gears for inch and D.P threads optionally available
• Switches with life cycle calculation tested according to EN ISO 13849
• Decoupled handwheels tested according to EN 23125
• Reduction of main spindle deceleration time by energy regeneration
• Chip tray can be pulled out to the front
• Coolant device
• Quick-change steel holder SWH 5-B
• Steel holder 25x120 type D for square chisel 20 mm
• LED machine lamp for complete illumination of the working area
• Cutting constant VSC

Technical data

Dimensions and weights

• Length (product) approx.: 1960 mm
• Width/depth (product) approx.: 1060 mm
• Height (product) approx.: 1690 mm
• Net weight approx.: 1250 kg

Work areas

• Max. height: 200 mm
• Max. width: 800 mm
• Swing diameter above machine bed: 400 mm
• Swing diameter above planing slide: 245 mm
• Bed width: 260 mm

Equipment

• Digital position indicator: DPA 32

Speed range

• Number of gears: 2
• Speed range: 50 - 3000 min¯¹

Electrical Data

• Drive motor output: 5.5 kW
• Supply voltage: 400 V
• Mains frequency: 50 Hz
• Operating mode: S6
• Duty cycle: 60 %

Cooling lubricant system

• Cooling lubricant system coolant pump output: 0.125 kW
• Cooling lubricant system tank capacity: 20 l

Standards and certifications

• Standard: DIN EN 55011
• EMC level: C3

Spindle

• Spindle chuck: DIN ISO 702-1 No. 5 Form A2
• Spindle bore: 52 mm
• Spindle cone: MT 6

Tailstock

• Tailstock chuck: MK 3
• Tailstock quill stroke: 110 mm
• Tailstock quill diameter: 50 mm

Pitches

• Metric pitch: 0.2 - 14 mm/rev
• Number of metric pitches: 36
• Imperial pitch: 80 - 1 Gg/1"
• Number of imperial pitches: 42
• Diametrical pitch: 3 - 200 Gg/?
• Number of diametrical pitches: 33
• Modular thread pitch: 0.1 - 7 mm/rev
• Number of modular thread pitches: 44

Travel

• Travel upper slide: 112 mm
• Travel cross slide: 212 mm
• Travel carriage saddle: 800 mm

Feed

• Longitudinal feed range: 0.0263 - 1.8416 mm/rev
• Number of longitudinal feeds: 48
• Flat feed range: 0.0133 - 0.9321 mm/rev
• Number of flat feeds: 48

Motor(s)

• Drive motor gears: 2

Delivery content

• Fixed steady rest passage Ø 10 - Ø 130 mm
• Moving steady rest passage Ø 10 - Ø 100 mm
• Adapter MK6-MK3
• Non-moving centering tip MK3
• Non-moving, but temperature resistant
• Quick change steel holder SWH 5-B
• Steel holder 25x120 TypeD for square chisel 20 mm
• Initial machine filling with quality oil
• Operating tool
• Do not forget the lathe chuck

Transport info

• EAN: 4030635047558
• Customs number: 84581900
• Length: 1820 mm
• Height: 1120 mm
• Width: 1930 mm
• Gross weight: 1400 kg
• Net weight: 1250 kg

Optional accessories

• Workplace mat 1840x640 mm
• Workplace mat 1840x940 mm
• Workplace mat 3040x640 mm
• Workplace mat 3040x940 mm
• BISON four-jaw lathe chuck steel Camlock, centric clamping Ø 250 mm DIN 6350 for A2-5
• Center drill set 10tlg. 0.75-4.5 mm HSS
• Change gear set for inch and module threads
• Chuck flange Ø 200 mm A2-5
• Chuck flange ø 250 mm for three- and four-jaw chucks A2-5
• Chuck flange BISON 160 mm
• Clamping block set for lathes 20-05
• Collet chuck 16C
• Cutting oil spray 400 ml
• Face plate Ø 320 mm Camlock DIN ISO 702-2 No. 5
• Internal turning set 5-piece
• Leveling plate SE 1
• Precision machine foot SEU1
• Revolving centering point MT 3
• Revolving centering point MT 3
• Revolving centering point MT 5
• Three-jaw lathe chuck cast BISON Ø 200 mm DIN 6350 A2-5
• Turning tool set HM 20 mm, 5-part
• Turning tool set HM 20 mm, 5-part