OFMER (TP 25/32) Combined Rebar Cutting and Bending Machine

MAIN FEATURES:

• The combined machines for cutting and bending iron are the ideal solution for sites with reduced workloads, allowing cutting and bending of iron with a single piece of equipment.
• This product line results from the union of the most modern construction technologies with our long experience in the sector.
• A monoblock gearbox and the cutting arm that form a single block of spheroidal cast iron, ensuring maximum solidity and sealing without welding.
• Gears and pinions in special tempered steel that work constantly in an oil bath in the gearbox, ensuring maximum durability.
• Enlarged rotating plate that allows wide bending radii.
• Long carriages to perform the “double bend”.
• Self-braking motors made in Italy to maximize the working capacities of each unit.
  

TECHNICAL SPECIFICATIONS:

• Two special steel blades already mounted on the machine;
• Stopper, essential for fixing the rod on the work surface, which allows to release the stress exerted on the rod at the point before bending, thus avoiding possible deformations of the rod. Usable with diameters up to 20mm;
• Square pin, to be used together with the stopper, to counteract and nullify the effort exerted on the stopper by bending;
• Bending pin in special cemented and tempered steel, to be positioned on the rotating plate, for the production of stirrups, as it allows to obtain tight bending radii. To be used with bars up to Ø 12mm;
• Three bush holder pins in special cemented and tempered steel, to be positioned on the work surface and completed with bushes. They support, together with the bushes, the stress deriving from the bending phase;
• Two pins, to be positioned on the plate to determine the bending angle;
• Set of Allen keys, useful for ordinary maintenance;
• Electric pedal, to facilitate the operator allowing him to have free hands and therefore to work from all sides of the machine;
• Set of wheels for moving the machine;
• Flying plug, which ensures electrical connection;
• Two mushroom buttons, to stop the machine instantly in case of emergency. They are placed on two opposite sides of the machine;
• Long carriages, supplied with all bending machines with a maximum of 10 holes, essential if you want to perform double bending.
  

Technical Specifications:

• Operations per minute: 10
• Motor power: 3 HP / 2.2 kW
• Power supply: 3-Phase
• Cutting capacity (65 kg/mm² steel):
• 1 × Ø24 mm
• 2 × Ø18 mm
• 3 × Ø14 mm
• Bending capacity (65 kg/mm² steel):
• 1 × Ø28 mm
• 2 × Ø20 mm
• 3 × Ø16 mm
• Cutting capacity (85 kg/mm² steel):
• 1 × Ø22 mm
• 2 × Ø16 mm
• 3 × Ø12 mm
• Bending capacity (85 kg/mm² steel):
• 1 × Ø26 mm
• 2 × Ø18 mm
• 3 × Ø14 mm
• Dimensions: 80 × 100 × 83 cm
• Weight: 342 kg