Optimum (3402030) Guide and traction spindle Lathes OPTIturn TH 3309

Description

• Hardened and ground Z-axis guideway
• Precisely machined slide
• Guaranteed concentricity of the spindle nose ? 0.015 mm
• Lead screw cover
• All guides can be adjusted using gibs
• Right/left rotation switchable on the bed slide
• Two-channel safety electronics
• DC 24 V electrics with two-channel safety circuit in accordance with EN 23125
• Switch with life cycle calculation tested according to EN ISO 13849
• Gear wheels smooth-running, hardened and ground
• Main spindle runs in oil bath
• Upper slide adjustment range ± 90°
• LED machine lamp integrated in chip guard
• Handwheels with adjustable fine scaling 0.04 / 0.02 mm
• Handwheels decoupled and tested according to EN 23125
• Safety handwheels with disengagement function in the X- and Z-axis
• Heavily ribbed prism bed, induction hardened and precision ground
• Tailstock adjustable ± 10 mm for taper turning
• Tailstock quill and handwheel with adjustable fine scaling 0.02 mm
• Quick, easy and tool-free adjustment using clamping lever
• Machine base with tool compartment on the right-hand side (left-hand side with 3 panels (no compartments))
• Lockable main switch
• Quadruple steel holder
• Emergency stop device with foot control
• Rotating chuck guard tested in accordance with EN 23125
• Set of interchangeable gears included as standard

Technical data

Dimensions and weights

• Length (product) approx.: 1685 mm
• Width/depth (product) approx.: 745 mm
• Height (product) approx.: 1320 mm
• Net weight approx.: 510 kg

Work areas

• Max. height: 165 mm
• Max. width: 830 mm
• Swing diameter above machine bed: 330 mm
• Swing diameter above planing slide: 208 mm

Speed range

• Number of gears: 16
• Speed range: 70 - 2000 min¯¹

Electrical Data

• Drive motor output: 1,5 kW
• Supply voltage: 400 V
• Mains frequency: 50 Hz

Spindle

• Spindle chuck: Camlock DIN ISO 702-2 No. 4
• Spindle bore: 38 mm
• Tool holder max. chuck height: 16 mm
• Spindle cone: MK 5

Tailstock

• Tailstock chuck: MK 3
• Tailstock quill stroke: 110 mm
• Tailstock quill diameter: 32 mm

Pitches

• Metric pitch: 0,4 - 7 mm/rev
• Number of metric pitches: 26
• Imperial pitch: 56 - 4 Gg/1"
• Number of imperial pitches: 34

Travel

• Travel upper slide: 98 mm
• Travel cross slide: 164 mm
• Travel carriage saddle: 695 mm

Feed

• Longitudinal feed range: 0,052 - 1,392 mm/rev
• Number of longitudinal feeds: 32
• Flat feed range: 0,014 - 0,38 mm/rev
• Number of flat feeds: 32

Delivery content

• Steady rest passageway Ø 6 - 50 mm
• Follow rest passageway Ø 8 - 30 mm
• LED machine lamp
• Reduction sleeve MT 5 - MT 3
• Two fixed centres MT 3
• Quadruplicate tool holder 16 mm
• Replaceable gear set
• Machine chassis
• Machine initially filled with premium grade oil
• Operating tool

Transport info

• EAN: 4030635031304
• Customs number: 84581900
• Length: 1710 mm
• Height: 1520 mm
• Width: 760 mm
• Gross weight: 560 kg
• Net weight: 450 kg

Optional accessories

• BISON four-jaw lathe chuck Cast Camlock centric exciting Ø 160 mm Camlock DIN ISO 702-2 No. 4
• BISON four-jaw lathe chuck Cast Camlock centric exciting Ø 200 mm Camlock DIN ISO 702-2 No. 4
• BISON three-jaw lathe chuck Camlock casting centre clamping Ø 160 mm Camlock DIN ISO 702-2 No. 4
• BISON three-jaw lathe chuck Camlock casting centre clamping Ø 200 mm Camlock DIN ISO 702-2 No. 4
• Center drill set 10tlg. 0.75-4.5 mm HSS
• Clamping block set for lathes 16-05
• Collet chuck 5C - No. 4
• Collet set SPC 5C
• Cutting oil spray 400 ml
• Face plate Ø 300 mm Camlock DIN ISO 702-2 No. 4
• Internal turning set 12 mm
• Internal turning set 5-piece
• Leveling plate SE 1
• OPTIMUM four-jaw lathe chuck Cast Camlock, centre clamping Ø 200 mm Camlock DIN ISO 702-2 No. 4
• OPTIMUM four-jaw lathe chuck Cast Camlock, single clamping Ø 200 mm Camlock DIN ISO 702-2 No. 4
• OPTIMUM Three-jaw lathe chuck centre clamping Ø 200 mm Camlock DIN ISO 702-2 No. 4
• Position stop with fine adjustment for lathe TH3309
• Precision machine foot SEU1
• Quick change tool kit SWH 3 - E
• Revolving centering point MT 3
• Revolving centering point MT 3
• Revolving centering point MT 3
• Twist drill HSS with Morse taper MT 3
• Universal coolant device 230 V