Optimum (3402085) Mechanics Lathe OPTIturn TH 4010V

Description

• Hardened and ground Z-axis guideway
• Precisely machined slide
• Guaranteed concentricity of the spindle nose better than 0.015 mm
• Spindle holder Camlock DIN ISO 702-2 No. 5
• DC 24 volt electrics
• All guides can be adjusted using wedge strips
• Right/left rotation switchable on the bed slide
• Two-channel safety electronics
• Switch with life cycle calculation, tested in accordance with EN ISO 13849
• Smooth-running gear wheels, hardened and ground
• Main spindle runs in an oil bath
• Quick, easy and tool-free adjustment using clamping lever
• Gear wheels and shafts hardened and ground, running in an oil bath in precision bearings
• Handwheels with adjustable fine scaling 0.04 / 0.02 mm
• Safety handwheels with push-out function in the X- and Z-axis
• Adjustment range top slide ± 90
• Heavily ribbed prism bed, induction-hardened and precision-ground from gray cast iron
• Pull-out chip tray with guide rails
• Lockable main switch
• Emergency stop device with foot actuation
• Machine base with three panels (no compartments)
• Coolant device
• LED machine lamp in the chip guard

Technical data

Dimensions and weights

• Length (product) approx.: 1920 mm
• Width/depth (product) approx.: 740 mm
• Height (product) approx.: 1555 mm
• Net weight approx.: 780 kg

Working areas

• Center height: 205 mm
• Distance between centers: 1000 mm
• Swing diameter over machine base: 410 mm
• Swing diameter over cross slide: 255 mm
• Base width: 206 mm

Equipment

• Digital position indicator: DPA 31 Plus

Speed range

• Speed control: electronically adjustable
• Number of gears: 2
• Speed range: 30 - 3000 min¯¹

Electrical data

• Drive motor power: 4,0 kW
• Supply voltage: 400 V
• Mains frequency: 50 Hz

Standards and certifications

• Standard: DIN EN 55011
• EMC level: C3

Spindle

• Spindle chuck: Camlock DIN ISO 702-2 No. 5
• Spindle bore: 52 mm
• Max. height of tool holder: 16 mm
• Spindle taper: MT 6

Tailstock

• Tailstock chuck: MK 3
• Tailstock milling head travel: 130 mm
• Tailstock milling cutter diameter: 45 mm

Threads

• Metric pitch: 0,4 - 7 mm/rev
• Number of metric pitches: 42
• Imperial pitch: 70 - 4 Gg/1"
• Number of imperial pitches: 42

Travel

• Top slide travel: 100 mm
• Cross slide travel: 195 mm
• Carriage saddle travel: 750 mm

Feed

• Longitudinal feed range: 0,043 - 0,653 mm/rot
• Number of longitudinal feeds: 48
• Surface feed range: 0,015 - 0,206 mm/rot
• Number of surface feeds: 48

Product information EU 2023/2854

• Type of generated data: Usage data
• Format of generated data: Common machine-readable formats, such as JSON
• Data volume: Up to 5 MB
• Continuous real-time data generation: Yes
• Data storage location: No dispositivo
• Data access: Via physical interfaces
• Other information: In the instruction manual or at info@stuermer-maschinen.de

Delivery content

• Fixed bezel passage Ø 5 - 85 mm
• Running bezel passage Ø 5 - 65 mm
• LED machine light
• Reduction sleeve MK 6 / MK 3
• Fixed centering points MK 3
• Fixed centering point MK 3, alloyed
• Change gear set
• Initial machine filling with quality oil
• operating tool

Transport info

• EAN: 4030635031502
• Customs number: 4030635031502
• Gross weight: 820.00 kg
• Net weight: 735.00 kg

Optional accessories

• BISON four-jaw lathe chuck Cast Camlock centric exciting Ø 200 mm Camlock DIN ISO 702-2 No. 5
• BISON three-jaw lathe chuck Camlock casting centre clamping Ø 200 mm Camlock DIN ISO 702-2 No. 5
• Clamping block set for lathes 16-05
• Collet chuck 5C - No. 5
• Collet set SPC 5C
• Cutting oil spray 400 ml
• Internal turning set 5-piece
• Leveling plate SE 2
• OPTIMUM four-jaw lathe chuck Cast Camlock, centre clamping Ø 200 mm Camlock DIN ISO 702-2 No. 5
• OPTIMUM four-jaw lathe chuck Cast Camlock, single clamping Ø 200 mm Camlock DIN ISO 702-2 No. 5
• Precision machine foot SEU1
• Quick change tool kit SWH 3 - E
• Revolving centering point MT 3
• Revolving centering point MT 3
• Revolving centering point MT 3
• Spare steel holder 20x100 type D
• Spare steel holder 30x100 type H
• Turning tool set 16 mm, 11 parts
• Turning tool set HM 16 mm, 5-part
• Turning tool set HM 16 mm, 5-part
• Turning tool set HM 16 mm, 5-part "Made in Germany"
• Turning tool set HM 20 mm, 5-part
• Turning tool set HM 20 mm, 5-part
• Twist drill HSS with Morse taper MT 3