Optimum (3432422) Lathe OPTIturn TX 4414

Description

• Machine bed made of heavily ribbed cast iron
• One-piece machine base made of steel
• High rigidity of the headstock housing due to heavily ribbed 25GG casting
• Precisely machined slide
• Shafts on needle bearings, all components are lubricated in an oil bath
• Bed guides hardened and precision ground
• All electronic controls can be reached centrally
• All gear wheels of the feed gear made of hardened steel
• Handwheels decoupled and tested in accordance with EN 23125
• Two-channel safety electronics
• Switch with life cycle calculation, tested in accordance with EN ISO 13849
• Coolant system with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
• Complete lead and pull spindle cover
• Complete illumination of the work area
• Hardened and ground face spindle ensures enormous accuracy and durability
• High chip removal during roughing is no problem thanks to the high cutting capacity
• Energy chain for gentle cable and hose guidance
• Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
• No change wheels necessary
• With safety device to prevent simultaneous operation of tapping and feed mechanism
• Electronically braked motor
• Electronic feed cut-off of the Z-axis
• Electric position cut-off with quadruple position stop
• Three-jaw lathe chuck included in the scope of delivery
• SWH 5-B quick-change steel holder included in the scope of delivery

Technical data

Dimensions and weights

• Length (product) approx.: 2410 mm
• Width/depth (product) approx.: 1085 mm
• Height (product) approx.: 1825 mm
• Net weight approx.: 2030 kg

Work areas

• Max. height: 220 mm
• Max. width: 1280 mm
• Swing diameter above machine bed: 440 mm
• Swing diameter above planing slide: 250 mm
• Bed width: 300 mm

Equipment

• Digital position indicator: DPA 32

Speed range

• Number of gears: 12 Steps
• Speed range: 40 - 2200 min¯¹

Electrical Data

• Drive motor output: 5.5 kW
• Supply voltage: 400 V
• Mains frequency: 50 Hz
• Total rated value: 6.1 kW

Cooling lubricant system

• Cooling lubricant system coolant pump output: 100 W

Spindle

• Spindle chuck: Camlock DIN ISO 702-2 No. 6
• Tool holder: SWH 5-B
• Spindle bore: 52 mm
• Spindle cone: MT 6

Tailstock

• Tailstock chuck: MT 4
• Tailstock quill stroke: 180 mm
• Tailstock quill diameter: 58 mm

Pitches

• Metric pitch: 0,5 - 7,5 mm/rev
• Number of metric pitches: 44
• Imperial pitch: 60 - 4 Gg/Zoll
• Number of imperial pitches: 44
• Diametrical pitch: 0,25 - 3,75 mmx?
• Number of diametrical pitches: 44
• Modular thread pitch: 120 - 8 Gg/?
• Number of modular thread pitches: 44

Travel

• Travel upper slide: 153 mm
• Travel cross slide: 290 mm
• Travel carriage saddle: 950 mm

Feed

• Longitudinal feed range: 0,05 - 0,752 mm/rev
• Number of longitudinal feeds: 44
• Flat feed range: 0,025 - 0,376 mm/rev
• Number of flat feeds: 44

Delivery content

• Three-jaw lathe chuck Ø 200 mm Camlock No. 6
• Two non-running centers MK3 and MK5
• Adapter MK6-MK5
• Quick change steel holder SWH 5-B
• Machine initial filling with quality oil
• Operating tool

Transport info

• EAN: 4030635047497
• Customs number: 84581900
• Length: 2400 mm
• Height: 2000 mm
• Width: 1150 mm
• Gross weight: 2100 kg
• Net weight: 2030 kg

Optional accessories

• Workplace mat 1840x640 mm
• Workplace mat 1840x940 mm
• Workplace mat 3040x640 mm
• Workplace mat 3040x940 mm
• BISON four-jaw lathe chuck Cast Camlock centric exciting Ø 200 mm Camlock DIN ISO 702-2 No. 6
• Center drill set 10tlg. 0.75-4.5 mm HSS
• Clamping block set for lathes 20-05
• Collet set SPC 5C
• Cutting oil spray 400 ml
• Face plate Ø 350 mm Camlock DIN ISO 702-2 No. 6
• Fixed bezel for TX 4412
• Internal turning set 5-piece
• Leveling plate SE 2
• OPTIMUM four-jaw lathe chuck Cast Camlock, centre clamping Ø 200 mm Camlock DIN ISO 702-2 No. 6
• Revolving centering point MT 4
• Revolving centering point MT 4
• Revolving centering point MT 4
• Rotating bezel for TX 4412
• Turning tool set HM 20 mm, 5-part
• Turning tool set HM 20 mm, 5-part
• Turning tool set HM 25 mm, 5-part
• Turning tool set HM 25 mm, 5-part
• Vibration damper machine foot SE 55
• Vibration damper machine foot SE 85