Optimum (3432425) Precision center Lathe and draw spindle Lathe OPTIturn TX 4814V

Description

• Machine bed made of heavily ribbed cast iron
• One-piece machine base made of steel
• High rigidity of the headstock housing thanks to heavily ribbed 25GG casting
• All gear wheels of the feed gear made of hardened steel
• Shafts on needle bearings, all components are lubricated in an oil bath
• Hardened and ground face spindle ensures enormous accuracy and durability
• High chip removal during roughing is no problem thanks to the high cutting capacity
• Service-friendly removable rear panel
• Energy chain for gentle cable and hose guidance
• Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
• Handwheels decoupled and tested in accordance with EN 23125
• Two-channel safety electronics
• No change wheels necessary
• Switch with life cycle calculation tested in accordance with EN ISO 13849
• With safety device to prevent simultaneous operation of tapping and feed mechanism
• Bed guides hardened and precision ground
• Electronically braked motor
• Electronic feed cut-off of the Z-axis
• Electric position cut-off with quadruple position stop
• Three-jaw lathe chuck included as standard
• Digital position indicator DPA 32 with cutting constant VSC

Technical data

Dimensions and weights

• Length (product) approx.: 2288 mm
• Width/depth (product) approx.: 1050 mm
• Height (product) approx.: 1740 mm
• Net weight approx.: 1700 kg

Work areas

• Max. height: 240 mm
• Max. width: 1260 mm
• Swing diameter above machine bed: 480 mm
• Bed width: 300 mm

Speed range

• Number of gears: 6 Steps
• Speed range: 20 - 2500 min¯¹

Electrical Data

• Drive motor output: 5.5 kW
• Supply voltage: 400 V
• Mains frequency: 50 Hz

Spindle

• Spindle chuck: Camlock DIN ISO 702-2 No. 8
• Spindle bore: 80 mm
• Spindle cone: MT 7

Pitches

• Metric pitch: 0,5 - 7,5 mm/rev
• Number of metric pitches: 44

Travel

• Travel upper slide: 153 mm
• Travel cross slide: 290 mm

Feed

• Longitudinal feed range: 0,05 - 0,752 mm/rev
• Number of longitudinal feeds: 44
• Flat feed range: 0,025 - 0,376 mm/rev
• Number of flat feeds: 44

Delivery content

• Operating tool
• Initial machine filling with quality oil
• Three-jaw lathe chuck Ø 200 mm
• Camlock no. 8
• Two non-rotating centers MT6 and MT5
• Quick-change holder SWH 5-B

Transport info

• EAN: 4030635050190
• Customs number: 84581900
• Length: 1840 mm
• Height: 1590 mm
• Width: 850 mm
• Gross weight: 518 kg
• Net weight: 440 kg

Optional accessories

• Workplace mat 1840x640 mm
• Workplace mat 1840x940 mm
• Workplace mat 3040x640 mm
• Workplace mat 3040x940 mm
• BISON four-jaw lathe chuck Cast Camlock centric exciting Ø 250 mm Camlock DIN ISO 702-2 No. 8
• Cutting oil spray 400 ml
• Face plate Ø 480 mm Camlock DIN ISO 702-2 No. 8
• Fixed bezel for TX 4412
• OPTIMUM four-jaw lathe chuck Cast Camlock, centre clamping Ø 315 mm Camlock DIN ISO 702-2 No. 8
• Precision machine foot SEU1
• Revolving centering point MT 4
• Revolving centering point MT 4
• Rotating bezel for TX 4412