Optimum (3432462) Precision guide and drawbar turning Machine OPTIturn TX 6222 - DPA 32

Description

• Machine bed made of heavily ribbed cast iron
• One-piece machine base made of steel
• High rigidity of the headstock housing thanks to heavily ribbed 25GG casting
• All gear wheels of the feed gear made of hardened steel
• Shafts on needle bearings, all components are lubricated in an oil bath
• Hardened and ground face spindle ensures enormous accuracy and durability
• High chip removal during roughing is no problem thanks to the high cutting capacity
• Service-friendly removable rear panel
• Energy chain for gentle cable and hose guidance
• Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
• Decoupled handwheels tested in accordance with EN 23125
• Two-channel right/left switch tested in accordance with EN 23125
• No change wheels necessary
• Switch with life cycle calculation tested in accordance with EN ISO 13849
• With safety device to prevent simultaneous operation of tapping and feed mechanism
• Bed guides hardened and precision ground
• Electronically braked motor
• Electronic feed cut-off of the Z-axis
• All electronic controls can be reached centrally
• Complete illumination of the work area
• External coolant tank with level indicator and oil separator
• Complete lead and feed spindle cover
• Electric position stop with quadruple position stop
• Three-jaw lathe chuck included as standard
• Quick-change steel holder SWH 7-C
• 1 steel holder 32x130 type D for square chisel 25 mm
• Digital position indicator DPA 32-3

Technical data

Dimensions and weights

• Length (product) approx.: 3550 mm
• Width/depth (product) approx.: 1200 mm
• Height (product) approx.: 1830 mm
• Net weight approx.: 2800 kg

Work areas

• Max. height: 310 mm
• Max. width: 2200 mm
• Swing diameter above machine bed: 620 mm
• Swing diameter above planing slide: 424 mm
• Turning length in bed bridge: 880 mm
• Bed width: 350 mm

Speed range

• Number of gears: 12
• Speed range: 40 - 1650 min¯¹

Electrical Data

• Drive motor output: 7,5 kW
• Supply voltage: 400 V
• Mains frequency: 50 Hz
• Total rated value: 8.5 kW

Cooling lubricant system

• Cooling lubricant system coolant pump output: 100 W

Spindle

• Spindle chuck: Camlock DIN ISO 702-2 No. 8
• Spindle bore: 105 mm
• Spindle cone: Ø 113 (cone 1:20) mm

Tailstock

• Tailstock chuck: MT5
• Tailstock quill stroke: 180 mm
• Tailstock quill diameter: 72 mm

Pitches

• Metric pitch: 0,5 - 15 mm/rev
• Number of metric pitches: 55
• Imperial pitch: 60 - 2 Gg/1"
• Number of imperial pitches: 55
• Diametrical pitch: 120 - 4 Gg/?
• Number of diametrical pitches: 55
• Modular thread pitch: 0,25 - 7,5 mmx?
• Number of modular thread pitches: 55

Travel

• Travel upper slide: 170 mm
• Travel cross slide: 350 mm
• Travel carriage saddle: 2000 mm

Feed

• Longitudinal feed range: 0,05 - 1,5 mm/rev
• Number of longitudinal feeds: 55
• Flat feed range: 0,025 - 0,75 mm/rev
• Number of flat feeds: 55

Delivery content

• Operating tool
• Initial machine filling with quality oil
• Three-jaw lathe chuck Ø 315 mm Camlock no. 8
• Two non-rotating centers MK5 (short/long)
• Quick-change toolholder SWH 7-C
• Steel holder for square chisel 32x130 type D
• Adapter Ø 113 mm-MK5

Transport info

• EAN: 4030635047527
• Customs number: 84581900
• Length: 2124 mm
• Height: 1400 mm
• Width: 3580 mm
• Gross weight: 2905 kg
• Net weight: 2800 kg

Optional accessories

• Workplace mat 1840x640 mm
• Workplace mat 1840x940 mm
• Workplace mat 3040x640 mm
• Workplace mat 3040x940 mm
• Center drill set 10tlg. 0.75-4.5 mm HSS
• Clamping block set for lathes 20-05
• Collet chuck 5C - No. 8
• Collet set SPC 5C
• Cutting oil spray 400 ml
• Face plate Ø 480 mm Camlock DIN ISO 702-2 No. 8
• Fixed bezel passage 10 - 185 mm for TX 6222
• Fixed bezel passage 160 - 285 mm for TX 6222
• Internal turning set 5-piece
• Leveling plate SE 2
• Revolving centering point MT 3
• Revolving centering point MT 5
• Revolving centering point MT 5
• Rotating bezel passage 15 - 125 mm for TX 6222
• Turning tool set HM 25 mm, 5-part
• Turning tool set HM 25 mm, 5-part
• Vibration damper machine foot SE 85