Optimum (3403025) Guide and traction spindle Lathes OPTIturn TM 3310D

Description

• Hardened and ground Z-axis guideway
• Precisely machined carriage
• DC 24 volt electrics
• Motor protection switch
• Main motor electrically braked
• Guaranteed concentricity of the spindle nose better than 0.015 mm
• Smooth-running feed gear with rounded gears running in an oil bath
• Hardened main spindle mounted in adjustable, precise tapered roller bearings
• Right/left rotation switchable on the bed slide
• Two-channel safety electronics
• Handwheels with adjustable fine scaling 0.04 / 0.02 mm
• Safety handwheels with disengagement function according to EN23125 in thexand Z axis
• Switch rod on the bed slide for selecting longitudinal or face feed
• Switch with life cycle calculation tested in accordance with EN ISO 13849
• Machine base in sturdy steel construction
• Quadruple steel holder
• Emergency stop switch right and left

Technical data

Dimensions and weights

• Length (product) approx.: 1760 mm
• Width/depth (product) approx.: 745 mm
• Height (product) approx.: 1320 mm
• Net weight approx.: 471 kg
• Max. height (product) ca.: 1590 (DPA) mm

Work areas

• Max. height: 165 mm
• Max. width: 1000 mm
• Swing diameter above machine bed: 330 mm
• Swing diameter above planing slide: 216 mm
• Bed width: 190 mm

Equipment

• Digital position indicator: DPA 31 Plus

Speed range

• Number of gears: 9 Steps
• Speed range: 65 - 2000 min¯¹

Electrical Data

• Drive motor output: 1,5 kW
• Supply voltage: 400 V
• Mains frequency: 50 Hz

Spindle

• Spindle chuck: Camlock DIN ISO 702-2 No. 4
• Spindle bore: 38 mm
• Tool holder max. chuck height: 16 mm
• Spindle cone: MK 5

Tailstock

• Tailstock chuck: MK 3
• Tailstock quill stroke: 100 mm
• Tailstock quill diameter: 38 mm

Pitches

• Metric pitch: 0,4 - 10 mm/rev
• Number of metric pitches: 29
• Imperial pitch: 56 - 4 Gg/1"

Travel

• Travel upper slide: 90 mm
• Travel cross slide: 168 mm
• Travel carriage saddle: 850 mm

Feed

• Longitudinal feed range: 0,02 - 0,4 mm/rev
• Number of longitudinal feeds: 24
• Flat feed range: 0,01 - 0,2 mm/rev
• Number of flat feeds: 32

Delivery content

• three-jaw lathe chuck Ø 160 mm, No. 4
• LED machine light
• Reducing sleeve MK 5 / MK 3
• Non-rotating centring tip MK 3
• Quadruple steel holder 16 mm
• Change gear set
• Machine base
• Machine first filling with quality oil
• Operating tool

Transport info

• EAN: 4030635040702
• Customs number: 84581900
• Length: 1840 mm
• Height: 1590 mm
• Width: 850 mm
• Gross weight: 518 kg
• Net weight: 440 kg

Optional accessories

• Workplace mat 1840x640 mm
• Workplace mat 1840x940 mm
• Workplace mat 3040x640 mm
• Workplace mat 3040x940 mm
• BISON four-jaw lathe chuck Cast Camlock centric exciting Ø 200 mm Camlock DIN ISO 702-2 No. 4
• BISON three-jaw lathe chuck Camlock casting centre clamping Ø 200 mm Camlock DIN ISO 702-2 No. 4
• Center drill set 10tlg. 0.75-4.5 mm HSS
• Clamping block set for lathes 16-05
• Collet chuck 5C - No. 4
• Collet set SPC 5C
• Cutting oil spray 400 ml
• Fixed bezel passage 10 - 70 mm for TM 3310
• Internal turning set 12 mm
• Internal turning set 5-piece
• Leveling plate SE 1
• OPTIMUM four-jaw lathe chuck Cast Camlock, single clamping Ø 200 mm Camlock DIN ISO 702-2 No. 4
• OPTIMUM Three-jaw lathe chuck centre clamping Ø 200 mm Camlock DIN ISO 702-2 No. 4
• Position stop Micro
• Precision machine foot SEU1
• Quick change tool kit SWH 3 - E
• Revolving centering point MT 3
• Revolving centering point MT 3
• Revolving centering point MT 3
• Rotating bezel passage 10 - 70 mm for TM 3310
• Turning tool set 16 mm, 11 parts
• Turning tool set HM 16 mm, 5-part
• Turning tool set HM 16 mm, 5-part
• Turning tool set HM 16 mm, 5-part "Made in Germany"
• Twist drill HSS with Morse taper MT 3
• Universal coolant device 230 V