Optimum (3432442) Conventional Centre Lathe OPTIturn TX 5216 - DPA 32-3

Description

• Machine bed made of heavily ribbed cast iron
• One-piece machine base made of steel
• High rigidity of the headstock housing due to heavily ribbed 25GG casting
• Precisely machined slide
• Shafts on needle bearings, all components are lubricated in an oil bath
• Bed guides hardened and precision ground
• All electronic controls can be reached centrally
• All gear wheels of the feed gear made of hardened steel
• Handwheels decoupled and tested in accordance with EN 23125
• Two-channel safety electronics
• Switch with life cycle calculation, tested in accordance with EN ISO 13849
• Complete lead and pull spindle cover
• Complete illumination of the work area
• Hardened and ground face spindle ensures enormous accuracy and durability
• High chip removal during roughing is no problem thanks to the high cutting capacity
• Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
• Service-friendly removable rear panel
• No change wheels necessary
• With safety device to prevent simultaneous operation of tapping and feed mechanism
• Electronically braked motor
• Electronic feed cut-off of the Z-axis
• Electrical position switch-off with quadruple position stop
• Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
• Three-jaw lathe chuck included as standard
• Large spindle bore

Technical data

Dimensions and weights

• Length (product) approx.: 3016 mm
• Width/depth (product) approx.: 1270 mm
• Height (product) approx.: 2217 mm
• Net weight approx.: 2470 kg

Work areas

• Max. height: 260 mm
• Max. width: 1600 mm
• Swing diameter above machine bed: 520 mm
• Swing diameter above planing slide: 324 mm
• Turning length in bed bridge: 780 mm
• Bed width: 350 mm

Equipment

• Digital position indicator: DPA 32

Speed range

• Number of gears: 12
• Speed range: 30 - 1500 min¯¹

Electrical Data

• Drive motor output: 5.5 kW
• Supply voltage: 400 V
• Mains frequency: 50 Hz
• Total rated value: 6.1 kW

Cooling lubricant system

• Cooling lubricant system coolant pump output: 100 W

Spindle

• Spindle chuck: Camlock DIN ISO 702-2 No. 8
• Spindle bore: 80 mm
• Spindle cone: MT 7

Tailstock

• Tailstock chuck: MT5
• Tailstock quill stroke: 180 mm
• Tailstock quill diameter: 72 mm

Pitches

• Metric pitch: 0,5 - 15 mm/rev
• Number of metric pitches: 55
• Imperial pitch: 60 - 2 Gg/1"
• Number of imperial pitches: 55
• Diametrical pitch: 120 - 4 Gg/?
• Number of diametrical pitches: 55
• Modular thread pitch: 0,25 - 7,5 mmx?
• Number of modular thread pitches: 55

Travel

• Travel upper slide: 170 mm
• Travel cross slide: 350 mm
• Travel carriage saddle: 1400 mm

Feed

• Longitudinal feed range: 0,05 - 1,5 mm/rev
• Number of longitudinal feeds: 55
• Flat feed range: 0,025 - 0,75 mm/rev
• Number of flat feeds: 55

Delivery content

• Three jaw chucks
• Reduction sleeve MK 7 / MK 5
• Fixed center point MK 5 long
• Fixed centering point MK 5 short
• Quick change steel holder SWH 7-C (TX 5216)
• Quick change steel holder SWH 7-C (TX 6222)
• Steel holder 25x120 type D for square chisels
• operating tool

Transport info

• EAN: 4030635047503
• Customs number: 84581900
• Length: 2020 mm
• Height: 1860 mm
• Width: 1120 mm
• Gross weight: 2550 kg
• Net weight: 2470 kg

Optional accessories

• Workplace mat 1840x640 mm
• Workplace mat 1840x940 mm
• Workplace mat 3040x640 mm
• Workplace mat 3040x940 mm
• Center drill set 10tlg. 0.75-4.5 mm HSS
• Clamping block set for lathes 20-05
• Collet chuck 5C - No. 8
• Collet set SPC 5C
• Cutting oil spray 400 ml
• Face plate Ø 480 mm Camlock DIN ISO 702-2 No. 8
• Fixed bezel passage 10 - 185 mm for TX5216
• Fixed bezel passage 160 - 285 mm for TX 5216
• Internal turning set 5-piece
• Leveling plate SE 2
• Revolving centering point MT 3
• Revolving centering point MT 5
• Revolving centering point MT 5
• Rotating bezel passage 15 - 125 mm for TX5216
• Turning tool set HM 20 mm, 5-part
• Turning tool set HM 20 mm, 5-part
• Turning tool set HM 25 mm, 5-part
• Turning tool set HM 25 mm, 5-part
• Vibration damper machine foot SE 85