Positioned Gauges

Short Description:■ Non-magnetic■ TIN coating, hardness HV2300, extremely wear resistance■ Suitable for machine speed 400~600rpm 

Short Description:■ Non-magnetic■ CrN coating, hardness HV2000, extremely wear resistance■ Suitable for machine speed 400~600rpm 

Short Description:■ Ceramic contact point, non magnetic■ Hardened shank■ Suitable for machine speed: 400-600rpm 

Short Description:■ The LED will be light with alarm when the ballcontacts the workpiece■ Not suitable for rotating use■ Hardened shank and contact...

Short Description:■ Non-magnetic■ TIN coating, hardness HV2300, extremely wear resistance■ Suitable for machine speed 400~600rpm 

Short Description:■ Hardened shank and contact point■ Suitable for machine speed 400~600rpm 

Short Description:■ Non-magnetic■ TIALN coating, hardness HV3500; TIN coating, hardness Hv2300, extremely wear resistance■ Suitable for machine spe...

Short Description:■ Hardened shank and contact point■ Suitable for machine speed 400~600rpm 

Short Description:■ Non-magnetic■ TIALN coating, hardness HV3500; TIN coating, hardness HV2300, extremely wear resistance■ Suitable for machine spe...

Short Description:■ Non-magnetic■ TIN coating, hardness HV2300, extremely wear resistance■ Suitable for machine speed 400~600rpm■ Find edge or hole...

Short Description:■ Non-magnetic■ TIN coating, hardness HV2300, extremely wear resistance■ Suitable for machine speed 500~2000rpm 

Short Description:■ To be used on magnetic chucks■ Two parallels per set■ Hardness HRB70■ Copper magnetic strips 

Short Description:■ Hardened, high accuracy, for grinding, milling,drilling and inspection of round and squareworkpieces■ All working surfaces are ...

Short Description:■ Pairs of matched blocks for positioning and set-up■ Hardness HRC60±2 

Short Description:■ The magnetic pole arrangement is dense andcan hold thin and small workpieces■ Parallelism of top to bottom: 0.02mm/300mm 

Short Description:■ Shockproof,IP67 dust/waterproof■ Mainly used for milling machines and CNCmachine tools1. determine coordinate point on workpiec...

Short Description:■ Made of hardened tool steel■ With locking screw 

Short Description:■ Magnetic base with on/off switch 

Short Description:■ Magnetic base 

Short Description:■ IP65 protection level■ Magnetic base■ With backlight, will turn on automatically when close to zero (±0.002mm)■ Turn off automa...

Short Description:■ For quick and accurate centering in boring and milling set-up■ Jeweled bearing■ Supplied with 7 type feelers 

Short Description:■ Parallelism: 3μm/100mm■ Squareness: 5μm/100mm■ Accuracy of angle: ±20″■ Made of SKS tool steel, subzero treatment■ Hardness HRC...

Short Description:■ Horizontal rotary: range 360°, graduation 0.05°Vertical incline: range 45°, graduation 0.05°■ With vertical incline adjust knob...

Short Description:■ Made of hardened alloy steel■ Parallelism and squareness between A, B, C, D, E and F: 5μm /100mm■ Hardness HRC56-58